4-3
Chapter 4: MicroBlade Module Features
Power Button
Each MicroBlade module has its own power button so that individual blade units within
the enclosure may be turned on or off independently of the others. Press the power
button (#1) to turn on the blade server. The power LED (#3) will turn green. To turn off,
press and hold the power button for >4 seconds and the power LED will turn orange.
LED Indicators
Blade module LEDs are described below in Table 4-3.
Table 4-3. Blade Module LED Indicators
LED State Description
Power LED
Green Power On
Amber Standby
System Fault
LED (Red)
Steady On
This LED illuminates red when a fatal error occurs. This may be the
result of a memory error, a VGA error or any other fatal error that
prevents the operating system from booting up.
To Next Page
Loading...
