MBI-6218G-T41X MicroBlade Module User’s Manual
5-6
SATA Configuration
See Table 5-6 for a description of BIOS setup menu options in this
sub-menu.
Server ME Configuration
See Table 5-7 for a description of BIOS setup menu options in this
sub-menu.
PCIe/PCI/PnP
Configuration
See Table 5-8 for a description of BIOS setup menu options in this
sub-menu.
Super IO Configuration
See Table 5-9 for a description of BIOS setup menu options in this
sub-menu.
Serial Port Console
Redirection
See Table 5-10 for a description of BIOS setup menu options in this
sub-menu.
ACPI Settings
See Table 5-11 for a description of BIOS setup menu options in this
sub-menu.
Table 5-3. Boot Feature Submenu
Menu Option Description
Quiet Boot
Use this feature to select the screen display between the POST messages
and the OEM logo upon bootup. Select Disabled to display the POST
messages. Select Enabled to display the OEM logo instead of the normal
POST messages. The options are Enabled and Disabled.
AddOn ROM Display Mode
Use this feature to set the display mode for the Option ROM. Select Keep
Current to display the current AddOn ROM setting. Select Force BIOS to
use the Option ROM display set by the system BIOS. The options are
Force BIOS and Keep Current.
Bootup NumLock State
Use this feature to set the Power-on state for the <Numlock> key. The
options are Off and On.
Wait for ‘F1’ If Error
Use this feature to force the system to wait until the 'F1' key is pressed if an
error occurs. The options are Disabled and Enabled.
INT19 Trap Response
Interrupt 19 is the software interrupt that handles the boot disk function.
When this item is set to Enabled, the ROM BIOS of the host adaptors will
"capture" Interrupt 19 at bootup and allow the drives that are attached to
these host adaptors to function as bootable disks. If this item is set to
Disabled, the ROM BIOS of the host adaptors will not capture Interrupt 19,
and the drives attached to these adaptors will not function as bootable
devices. The options are Immediately and Postponed.
Re-try Boot
This option allows you to decide how to retry boot devices which fail to
boot. Options include Disabled, Legacy Boot or EFI Boot.
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reboot when it is
inactive for more than 5 minutes. The options are Enabled and Disabled.
Power Button Function
This feature controls how the system shuts down when the power button is
pressed. Select 4_Seconds_Override for the user to power off the system
after pressing and holding the power button for 4 seconds or longer. Select
Instant Off to instantly power off the system as soon as the user presses
the power button. The options are 4 Seconds Override and Instant Off.
Table 5-2. Advanced Setup Menu Options (Continued)
Sub-menu Description
To Next Page
Loading...
