7-32
SuperServer 6028U-T Series User’s Manual
Save Changes and Reset
Save Options
Save Changes
Select this option and press <Enter> to save all changes you've done so far and
return to the AMI BIOS utility Program. When the dialog box appears, asking you
Yes to save the changes, or select No to
return to the BIOS without making changes.
Discard Changes
Select this option and press <Enter> to discard all the changes and return to the
BIOS setup. When the dialog box appears, asking you if you want to load previous
values, select Yes to keep the previous values, or select No to keep the changes
you've made so far.
Restore Optimized Defaults
Select this option to load the optimized default settings. When the dialog box
appears, asking you if you want to load optimized defaults, select Yes to load the
optimized default settings, or select No to keep the defaults previously saved as
the user defaults.
Save as User Defaults
Select this option to save the current settings as the user's defaults. When the dialog
box appears, asking you if you want to save values as user's defaults, select Yes to
save the current values as user's default settings, or select No to keep the defaults
previously saved as the user's defaults.
Restore User Defaults
Select this option to load the user's defaults previously saved in the system. When
the dialog box appears, asking you if you want to restore user's defaults, select
Yes to restore the user's defaults previously saved in the system, or select No to
keep the changes you've made so far.
Boot Override
This optoin allows you to override the Boot Option Priorities setting in the Boot menu,
and instead immediately boot the system with one of the listed devices. This is a
To Next Page
Loading...
