Supermicro SuperServer 6028U-TR4+ - Other Connectors

Chapter 5: Advanced Serverboard Setup
5-17
Chassis Intrusion
A Chassis Intrusion header is located
at JL1. Attach an appropriate cable
from the chassis to inform you of a
chassis intrusion when the chassis
is opened.
Chassis Intrusion
Pin Denitions

1 Intrusion Input
2 Ground
Fan Header
Pin Denitions

1 Ground
2 +12V
3 Tachometer
4 Pulse Width Modulation
(PWM)
Fan Headers
The serverboard has eight system/
CPU fan headers (Fan 1~Fan 8). All
are 4-pin fans headers, which are
backward compatible with traditional
3-pin fans. Fan speed control is
available for 4-pin fans only. The
fan speeds are controlled by IPMI.
See the table on the right for pin

Internal Speaker
The Internal Speaker, located at
SP1, can be used to provide audible
indications for various beep codes.
See the table on the right for pin

Internal Speaker
Pin Denition

Pin 1 Pos. (+) Beep In
Pin 2 Neg. (-) Alarm
Speaker
TPM Header/Port 80
A Trusted Platform Module/Port 80
header is located at JTPM1 to provide
TPM support and Port 80 connection.
Use this header to enhance system
performance and data security. See

TPM/Port 80 Header
Pin Denitions
 
1 LCLK 2 GND
3 LFRAME# 4 <(KEY)>
5 LRESET# 6 +5V (X)
7 LAD 3 8 LAD 2
9 +3.3V 10 LAD1
11 LAD0 12 GND
13 SMB_CLK4 14 SMB_DAT4
15 +3V_DUAL 16 SERIRQ
17 GND 18 CLKRUN# (X)
19 LPCPD# 20 LDRQ# (X)
Other Connectors