EasyManua.ls Logo

Supermicro SuperServer 6028U-TR4+ - Adding PCI Expansion Cards

Supermicro SuperServer 6028U-TR4+
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 6: Advanced Chassis Setup
6-7
Expansion Card Congurations
Slot Mechanical Electrical In Models
1 Double Width, full height, full length x16 (CPU1) All but TNRT+, TNR4T+
2 Double Width, full height, full length x8 (CPU1) All but TR4T+, TNR4T+
3  x8 (CPU1) All models
4  x8 (CPU2) TR4+, TRT+, TRTP+
5 Full Height, full length x8 (CPU2) All models
6 Full Height, full length x8 (CPU2) All models
7 Full Height, full length x8 (CPU2) All models
8 Full Height, full length x8 (CPU2) All models

Full length = 10.5", Half length = 6.6"
6-5 Adding PCI Expansion Cards
Riser cards on chassis brackets allow you to add PCI expansion cards. The total
number of expansion cards depends on the model in the 6028U-T Series. (see "PCI
Expansion Slots" in Section 1-3 and the table below). All expansion cards are PCI-
Express 3.0. For all models:
RSC-R2UW-4E8 supports four standard size PCI-E x8 expansion cards (5-8).

󰀨
1
1
1
3
1
4
1
2
1
5
1
7
1
8
1
6
Figure 6-7. PCI Expansion Card Chassis Slots

Table of Contents

Other manuals for Supermicro SuperServer 6028U-TR4+

Related product manuals