6-8
SUPERSERVER 6028U-T Series User's Manual
Figure 6-8. Expansion and Riser Cards—Rear View
Installing PCI Expansion Cards
1. Power down the system and remove the top chassis cover.
2. Remove the Ultra riser bracket, then remove the WIO bracket as pictured in
Figures 6-8 and 6-9. Note the screwdriver icons imprinted in the chassis. They
indicate which screws must be removed to remove the brackets.
3. Insert the expansion card(s) into the riser card slot(s).
4. Replace the riser card into the serverboard expansion slot while aligning the
bracket into the chassis. Replace the securing screws.
5. Replace the chassis cover.
Ultra Riser Bracket
WIO Riser Bracket
To Next Page
Loading...
