B-2
SUPERSERVER 6028U-T Series User's Manual
installed on a bootable or non-bootable USB-attached device. However, the BIOS
To perform UEFI BIOS recovery using a USB-attached device, follow the instructions
below.
1.
Root "\" Directory of a USB device or a writeable CD/DVD.
Note:
device and rename it "Super.ROM" for BIOS recovery use.
2. Insert the USB device that contains the new BIOS image ("Super.ROM") into
your USB drive and power on the system
3. While powering on the system, please keep pressing <Ctrl> and <Home>
simultaneously on your keyboard until the following screen (or a screen similar
to the one below) displays.
Caution: Please stop pressing the <Ctrl> and <Home> keys immediately when you
see the screen (or a similar screen) below; otherwise, it will trigger a system reboot.
Note: On the other hand, if the following screen displays, please load the "Super.
inserting a USB device that contains the new "Super.ROM" image to your machine
for BIOS recovery.)
To Next Page
Loading...
