Chapter 5: Advanced Serverboard Setup
5-25
4. During Windows Setup, continue to the dialog where you select the drives on
which to install Windows. If the disk you want to use is not listed, click on “Load
driver” link at the bottom left corner.
Figure 5-6. Load Driver Link
• For RAID, choose the SATA/sSATA RAID driver indicated then choose the
storage drive on which you want to install it.
• For non-RAID, choose the SATA/sSATA AHCI driver indicated then choose
the storage drive on which you want to install it.
5.
6. After the Windows OS installation has completed, the system will automatically
reboot multiple times.
To Next Page
Loading...
