Appendix F CPU-Based RAID for NVMe
137
F.2 Enabling NVMe RAID
RAID for NVMe SSDs must be enabled through the UEFI BIOS.
1. Install the patch as described in the Restrictions and Requirements section on a
previous page.
2. Reboot the server.
3. Press [DEL] key to enter BIOS.
4. Switch to Advanced > Chipset Conguration > North Bridge > IIO Conguration >
Intel VMD Technology > Intel VMD for Volume Management on CPU2.
5. Enable the VMD.
Figure F-2. BIOS VMD Settings
6.
7. Press [DEL] to enter BIOS.
8. Switch to Advanced > Intel® Virtual RAID on CPU > All Intel VMD Controllers >
Create RAID Volume.
9. Set Name.
10. Set RAID Level.
For SYS-6029BT-DNC0R, enable VMD
sub-items under PStack0
To Next Page
Loading...
