8
SuperServer 6029BT-DNC0R User's Manual
Chapter 1
Introduction
1.1 Overview
This chapter provides a brief outline of the functions and features of the 6029BT-DNC0R
SuperServer. It is based on the X11DPT-B motherboard and the SC827BHD+-R2K22BP
chassis. This is a Big Twin chassis with two independent hot-swap computing nodes and
twelve 3.5" storage drives.
Models
System Drive Type 1U Storage Adapter (2) 2U Midplane (1)
6029BT-DNC0R SAS/NVMe hybrid BPN-ADP-6S3008N3-2UB BPN-SAS3-827BHQ-N3
In addition to the motherboard and chassis, several important parts that are included with
the system are listed below.
Main Parts List
Description Part Number Quantity
Power supply PWS-2K22A-1R 2
Fans FAN-0162L4 4
Heatsink
SNK-P0068PS
SNK-P0069PS
2 each
Air shroud MCP-310-21717-0B 2
PCIe Riser Card RSC-P2-88 2
Rack-mount rails MCP-290-00144-0N 1 set
1.2 Unpacking the System
Inspect the box the in which the server was shipped and note if it was damaged in any way.
Decide on a suitable location for the rack unit that will hold the server. It should be situated
in a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and
Be sure to read the precautions and considerations noted in Appendix B.
To Next Page
Loading...
