Supermicro SUPERSERVER 6029BT-DNC0R - Installing M.2 Solid State Drives

45
Chapter 3: Maintenance and Component Installation
Figure 3-12. Inserting the Stando󰀨 Plug
(Note: 󰀨󰀨
Figure 3-11. M.2 SSD onto Storage Adapter Card
(BPN-ADP-6S3008N3-2UB adapter card)
Installing M.2 Solid State Drives
Each node can accommodate two M.2 solid state drives (SSDs) on the storage adapter card.
Several SSD lengths are supported—42mm, 60mm, 80mm or 110mm. For each length, there
󰀨
SSD Sockets
Hole for Stando󰀨s
(choose one)
Installing an M.2 SSD
󰀨
correct hole for your M.2 SSD, you can slide the SSD into the socket, and secure it by pushing
󰀨
Caution: Use industry-standard anti-static equipment, such as gloves or wrist strap, and
follow precautions to avoid damage caused by ESD.