Supermicro SUPERSERVER 6029BT-DNC0R - Page 46

SuperServer 6029BT-DNC0R User's Manual
46
2. Pull the storage adapter card up and out of the motherboard slot.
3. 󰀨
your SSD length.
4. 
󰀨
5. 󰀨
6. Replace the adapter card into the JF1/SXB1/SXB2/JF2 slots on the motherboard and
replace the mounting screws.
7. Replace the node into the chassis and power up.
󰀨
󰀨
Removing the Storage Adapter Card
1. With the node out of the chassis, release the storage adapter card from the node. There

node connector.
Inside of Node Connector
Right Outside of Node
Top Edge of the
Storage Adapter Card
Figure 3-13. Removing the Storage Adapter Card