EasyManua.ls Logo

Supermicro SuperServer E300-9D-4CN8TP - Page 30

Supermicro SuperServer E300-9D-4CN8TP
121 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
SuperServer E300-9D-4CN8TP/E300-9D-8CN8TP User's Manual
TPM/Port 80 Header
A Trusted Platform Module (TPM)/Port 80 header is located at JTPM1 to provide TPM support
and a Port 80 connection. Use this header to enhance system performance and data security.

Trusted Platform Module Header
Pin Denitions
Pin# Denition Pin# Denition
1 +3.3V 2 SPI_CS#
3 RESET# 4 SPI_MISO
5 SPI_CLK 6 GND
7 SPI_MOSI 8
9 +3.3V Stby 10 SPI_IRQ#
System Management Bus Header
A System Management Bus header for additional slave devices or sensors is located at

External I
2
C Header
Pin Denitions
Pin# Denition
1 Data
2 Ground
3 Clock
4 NC
LAN Activity Header
JLANLED1 is the activity LED header for LAN1 through LAN4.
LAN Activity LED
Pin Denitions
Pin# Denition
1 3V3 Stby
2 LAN3_ACT_N
3 3V3 Stby
4 LAN4_ACT_N
SATA Ports
Twelve SATA 3.0 ports, supported by the Intel SoC chipset, are located on the
X11SDV-16C/-12C/-8C-TP8F motherboard. These SATA ports support RAID 0, 1, 5, and
10. SATA ports provide serial-link signal connections. Two additional SATA connections are
availabe via the M.2 connector.

Related product manuals