Supermicro X10DRH-CT - Ipmi; System Event Log

4-42
X10DRH-C/CT/i/iT Motherboard User’s Manual
BMC (Baseboard Management Controller) Firmware Revision
This item indicates the BMC rmware revision used in your system.
Status of BMC
This item indicates the status of the onboard BMC chip installed in your system.
System Event Log
Enabling/Disabling Options
SEL Components
Select Enabled to enable all system event logging support at bootup. The options
are Enabled and Disabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot.
Select Yes, On every reset to erase all system event logs upon each system reboot.
Select No to keep all system event logs after each system reboot. The options are
No, Yes, On next reset, and Yes, On every reset.
4-5 IPMI
This submenu allows the user to congure Intelligent Platform Management Inter-
face (IPMI) settings.