Supermicro X11DPX-T - Page 43

43
Chapter 2: Installation
COM1
LAN
CTRL
DESIGNED IN USA
X11DPX-T
REV:1.01A
I-SATA4~7 I-SATA0~3
FANC FAND
CPU2
CPU1
BIOS
LICENSE
JBT1
M.2 CONNECTOR
SAN MAC
MAC CODE
JF1
BAR CODE
IPMI CODE
VGA
USB 2/3
BT1
JNVI2C2
JNVI2C1
PCH
FANA
FAN2
FAN5
FAN1
P2-DIMMC1 P2-DIMMB1 P2-DIMMA1 P2-DIMMA2
P2-DIMMD2 P2-DIMMD1 P2-DIMME1
P2-DIMMF1
FAN6
P1-DIMMA2 P1-DIMMA1 P1-DIMMB1 P1-DIMMC1
JPWR1
JPWR2
JPWR3
JPI2C1
FAN4
LEDBMC
S-UM12
S-SATA0
S-SATA1
FANB
FAN3
JNCSI1
S-SGPIO
JSTBY1
JWD1
JSEN1
COM2
P1-DIMMF1 P1-DIMME1 P1-DIMMD1 P1-DIMMD2
SP1
USB8 (3.0)
JTPM1
JPWR4
ALWAYS POPULATE DIMMx1 FIRST
ALWAYS POPULATE DIMMx1 FIRST
ALWAYS POPULATE DIMMx1 FIRST
ALWAYS POPULATE DIMMx1 FIRST
JUIDB1
(UID)
LED2
(UID-LED)
USB 6/7 (3.0)
JL1
LEDPWR
JSD1
JSD2
JIPMB1
JRK1
JPTG1
JPCIE11
(CPU2 SLOT11 PCI-E 3.0 x4 (IN x8))
JPME2
LAN 2 LAN 1
USB 0/1
IPMI_LAN
USB 4/5 (3.0)
BMC
JPCIE2
(CPU1 SLOT2 PCI-E 3.0 x16)
JPCIE1
(CPU1 SLOT1 PCI-E 3.0 x8)
JPCIE3
(CPU1 SLOT3 PCI-E 3.0 x8)
JPCIE6
(CPU2 SLOT6 PCI-E 3.0 x16)
JPCIE5
(CPU2 SLOT5 PCI-E 3.0 x8)
JPCIE7
(CPU1 SLOT7 PCI-E 3.0 x8)
JPCIE8
(CPU2 SLOT8 PCI-E 3.0 x16)
JPCIE4
(CPU1 SLOT4 PCI-E 3.0 x16)
JPCIE9
(CPU2 SLOT9 PCI-E 3.0 x8)
JPCIE10
(CPU2 SLOT10 PCI-E 3.0 x8)
1
Front Panel USB 6/7 3.0
Header Pin Denitions
Pin# Denition Pin# Denition
1 VBUS 19 Power
2 Stda_SSRX- 18 USB3_RN
3 Stda_SSRX+ 17 USB3_RP
4 Ground 16 Ground
5 Stda_SSTX- 15 USB3_TN
6 Stda_SSTX+ 14 USB3_TP
7 Ground 13 Ground
8 D- 12 USB_N
9 D+ 11 USB_P
10 x
Back Panel USB 4/5 (3.0)
Pin Denitions
Pin# Denition Pin# Denition
1 VBUS 10 Power
2 D- 11 USB 2.0 Di󰀨erential Pair
3 D+ 12
4 Ground 13 Ground of PWR Return
5 StdA_SSRX- 14 SuperSpeed Receiver
6 StdA_SSRX+ 15 Di󰀨erential Pair
7 GND_DRAIN 16 Ground for Signal Return
8 StdA_SSTX- 17 SuperSpeed Transmitter
9 StdA_SSTX+ 18 Di󰀨erential Pair
Universal Serial Bus (USB) Ports
There are two USB 3.0 ports (USB 4/5) located on the I/O back panel. The motherboard also
has a front access USB 3.0 header that supports two USB connections (USB 6/7). A USB
Type A header, USB 8, provides also USB 3.0 support. The onboard headers can be used
to provide front side USB access with a cable (not included).
1. USB 0/1
2. USB 2/3
3. USB 4/5 (USB 3.0)
4. USB 6/7 (USB 3.0)
5. Type A USB 8 (USB 3.0)
4
3
3
1
2
5
Type A USB 8 (3.0)
Pin Denitions
Pin# Denition Pin# Denition
1 VBUS 5 SSRX-
2 USB_N 6 SSRX+
3 USB_P 7 Ground
4 Ground 8 SSTX-
9 SSTX+