Supermicro X11SAE-M - Page 52

52
X11SAE-M User's Manual
Watch Dog
JWD1 controls the Watch Dog function. Watch Dog is a monitor that can reboot the system
when a software application hangs. Jumping pins 1-2 will cause Watch Dog to reset the
system if an application hangs. Jumping pins 2-3 will generate a non-maskable interrupt
signal for the application that hangs. Watch Dog must also be enabled in BIOS. The default
setting is Reset.
Note: When Watch Dog is enabled, the user needs to write their own application
software to disable it.
Watch Dog
Jumper Settings
Jumper Setting Denition
Pins 1-2 Reset
Pins 2-3 NMI
Open Disabled
1. Watch Dog
MAC CODE
BIOS
LICENSE
DESIGNED IN USA
X11SAE-M
REV: 1.01
BAR CODE
S1
BIOS RESTORE
JF1
JPW2
JPW1
SP1
B3
JD1
JBT1
JTBT1
JSD1
JTPM1
JL1
JSTBY1
COM1
I-SATA3 I-SATA2
I-SATA7
I-SATA6
I-SATA1
I-SATA5
I-SATA0
I-SATA4
I-SGPIO1
I-SGPIO2
J23
LED3
LED1
FAN2
FAN1
FAN4
FAN5
JPME2
JPAC1
JWD1
JI2C1 JI2C2
JLED1
JPL2
JPL1
JVR1
MH12
MH9
MH10
MH11
FAN3
PCH
C236
SIO
BIOS
USB8/9(3.0)
USB10/11(3.0)
USB2/3 USB4/5
AUDIO FP
SLOT5 PCI 33MHz
PCH SLOT4 PCI-E 3.0 X4
CPU SLOT7 PCI-E 3.0 X16
HD AUDIO
UNB ECC/NON-ECC DDR4 DIMM REQUIRED
ALWAYS POPULATE BLUE SOCKET FIRST
M.2 PCI-E 3.0 X4
USB0/1
LAN2
USB6/7(3.0)
LAN1
HDMI/DP
DVI-D
DIMMB2
DIMMB1
DIMMA2
DIMMA1
CPU FAN
USB12/13(3.1)
CPU Socket LGA 1151
1