Supermicro X11SCQ-L - Page 54

54
Super X11SCQ/-L User's Manual
1. LAN1 Enable/Disable
2. LAN2 Enable/Disable
3. Audio Enable/Disable
+
X11SCQ
REV:1.01
MAC CODE
BAR CODE
DESIGNED IN USA
BIOS
LICENSE
Intel
Q370/H310
JGP1
JSMB1
DIMMA1
DIMMB1
DIMMA2
DIMMB2
J23
COM3/4
COM5/6
MH12
MH11
MH9
CON1
JPW2
SP1
COM2
COM1
JSTBY1
JD1
FAN1
FAN3
FAN4
FAN2
JPT1
JAT1
JPME2
JWD1
JLED1
JPL2
JPAC1
JPL1
JPW1
JL1
I-SATA5
I-SATA2
I-SATA4
I-SATA1
I-SATA3
I-SATA0
JF1
JBT1
JSD1
JTPM1
J*
B3
LED3
LED1
EDP
CPU
AUDIO FP
USB4/5
USB6/7(3.1)
SLOT4
SLOT5
SLOT6
ON
PWR
X
LED
OH/FF
RST
NIC2 NIC1
HDD
LED
USB10/11(3.1)
LED
PWR
HD AUDIO
SLOT7
UNB NON-ECC DDR4 DIMM REQUIRED
ALWAYS POPULATE BLUE SOCKET FIRST
PCI-E M.2-M1
LAN2
USB2/3
USB8/9(3.1)
LAN1
HDMI/DP
DVI-D
CPU FAN
KB/MOUSE
USB0/1
J5
1
2
LAN Port Enable/Disable
Use JPL1 to enable or disable LAN1, and JPL2 to enable or disable LAN2. The default setting
is Enabled.
LAN Port Enable/Disable
Jumper Settings
Jumper Setting Denition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
Onboard Audio Enable/Disable
JPAC1 allows you to enable or disable the onboard audio support. The default position is on
pins 1-2 to enable onboard audio connections. Refer to the table below for jumper settings.
Audio Enable/Disable
Jumper Settings
Jumper Setting Denition
Pins 1-2 Enabled (Default)
Pins 2-3 Disabled
3