Chapter 4: BIOS
77
DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on the SA
(System Agent) side of the DMI Link. The options are Disable, L0s, L1, and L0sL1.
DMI Extended Sync Control
Use this feature to enable or disable the DMI extended synchronization. The options are
Enable and Disable.
DMI De-emphasis Control
Use this feature to congure the De-emphasis control on DMI. The options are -6 dB
and -3.5 dB.
PEG Port Conguration
CPU SLOT7 PCI-E 3.0 X16
SLOT7 Enable Root Port
Use this feature to enable or disable the PCI Express Graphics (PEG) device in the port
specied by the user. The options are Disable, Enable, and Auto.
SLOT7 Max Link Speed
Use this feature to select PCI-E support for the device installed on SLOT7. The options
are Auto, Gen 1, Gen 2, and Gen 3.
SLOT7 ASPM
This feature appears if a graphics card is plugged in Slot 7. Use this feature to control
ASPM support for the device in Slot 7. The options are Disable, Auto, ASPM L0s, ASPM
L1, and ASPM L0sL1.
SLOT7 ASPM L0s
This feature appears if ASPM L0s is selected in the feature above. Use this feature to
enable PCIe ASPM L0s. The options are Root Port Only, Endpoint Port Only, and Both
Root and Endpoint Ports.
SLOT7 Slot Power Limit Value
Use this feature to set the upper limit on the power supplied by the PCIE slot. Press "+"
or "-" on your keyboard to change this value. The default setting is 75.
To Next Page
Loading...
