X11SCQ/-L User's Manual
78
SLOT7 Slot Power Limit Scale
Use this feature to select the scale used for the slot power limit value. The options are
1.0x, 0.1x, 0.01x, and 0.001x.
Program PCIe ASPM After OpROM
PCIe ASPM, the Active State Power Management for PCI-Express slots, is a power
management protocol used to manage power consumption of serial link devices installed
on PCI-E slots during a prolonged off-peak time. If this feature is set to Enabled, PCI-E
ASMP will be programmed after OPROM. If set to Disabled, the PCI-E ASPM will be
programmed before OPROM. The options are Disabled and Enabled.
GT - Power Management Control
RC6 (Render Standby)
Use this feature to enable render standby support. The options are Disabled and En-
abled.
Maximum GT frequency
Use this feature to dene the Maximum GT frequency. Choose between 33MHz (RPN)
and 1200Mhz (RP0). Any value beyond this range will be clipped to its min/max sup-
ported by the CPU. The options are Default Max Frequency, 100Mhz, 150MHz, 200MHz,
250MHz, 300MHz, 350MHz, 400MHz, 450MHz, 500MHz, 550MHz, 600MHz, 650MHz,
700MHz, 750MHz, 800MHz, 8520MHz, 900MHz, 950MHz, 1000MHz, 1050MHz,
1100MHz, 1150MHz, and 1200MHz.
Disable Turbo GT frequency
Use this feature to disable Turbo GT frequency. If set to Enabled, Turbo GT frequency
becomes disabled. If set to Disabled, GT frequency limiters will be removed. The options
are Enable and Disable.
VT-d
Select Enabled to activate Intel Virtualization Technology support for Direct I/O VT-d by
reporting the I/O device assignments to VMM through the DMAR ACPI Tables. This feature
offers fully-protected I/O resource-sharing across the Intel platforms, providing the user with
greater reliability, security and availability in networking and data-sharing. The options are
Disable and Enable.
SW Guard Extensions
Select Enabled to activate the Sfotware Guard Extensions (SGX). The options are Disabled,
Enabled, and Software Controlled.
To Next Page
Loading...
