EasyManua.ls Logo

Supermicro X11SCQ-L - Page 79

Supermicro X11SCQ-L
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4: BIOS
79
Select Owner EPOCH input type
There are three Owner EPOCH modes (each EPOCH is 64 bit). The options are No Change
in Owner EPOCHs, Change to New Random Owner EPOCHs, and Manual User Dened
Owner EPOCHs.
PRMRR Size
This BIOS must reserve a contiguous region of Processor Reserved Memory (PRM) in the
Porcessor Reserved Memory Range Register (PRMRR). This feature appears if SW Guard
Extensions is set to Enabled. The options are 32MB, 64MB, and 128MB.
GNA Device (B0:D8:F0)
Use this feature to enable SA GNA device. The options are Enable and Disable.
X2APIC Opt Out
Use this feature to enable or disable X2APIC Opt Out. The options are Disable or Enable.
PCH-IO Conguration
The following PCH-IO information will display:
PCH SKU Name
Stepping
PCI Express Conguration
DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on the SA
(System Agent) side of the DMI Link. The options are Disabled, L0s, L1, L0sL1, and Auto.
Peer Memory Write Enable
Use this feature to enable or disable peer memory write. The options are Disabled and
Enabled.
PCH SLOT4 PCI-E 3.0 X4
PCH SLOT5 PCI-E 3.0 X4
PCH SLOT6 PCI-E 3.0 X1
ASPM
Use this feature to activate the Active State Power Management (ASPM) level for a
PCI-E device. Select Auto for the system BIOS to automatically set the ASPM level
based on the system conguration. Select Disabled to disable ASPM support. The
options are Disabled, L0s, L1, L0sL1, and Auto.

Table of Contents

Related product manuals