Supermicro X11SCV-Q - Page 75

Chapter 4: BIOS
75
DVMT Total Gfx Mem
Use this feature to set the total memory size to be used by internal graphics devices
based on the DVMT 5.0 platform. The options are 128MB, 256MB, and MAX.
VDD Enable
Enabling this feature will force VDD in the BIOS. The options are Enable and Disable.
PM Support
Enable this feature to activate Power Management BIOS support. The options are En-
able and Disable.
PAVP Enable
Protected Audio Video Path (PAVP) decodes Intel integrated graphics encrypted video.
The options are Disable and Enable.
Cdynmax Clamping Enable
Enable this feature to activate Cdynmax Clamping. The options are Enable and Disable.
Graphics Clock Frequency
Use this feature to set the internal graphics clock frequency. The options are 337.5 Mhz,
450 Mhz, 540 Mhz, and 675 Mhz.
Skip CD Clock Init in S3 resume
Use this feature to enable skipping of the full CD initialization. If set to Disabled, the full
CD clock will initialize. The options are Enable and Disable.
DMI/OPI Conguration
DMI X4 Gen3
DMI Link ASPM Control
Use this feature to set the ASPM (Active State Power Management) state on the SA
(System Agent) side of the DMI Link. The options are Disable, L0s, L1, and L0sL1.
DMI Extended Sync Control
Use this feature to enable or disable the DMI extended synchronization. The options are
Enable and Disable.
DMI De-emphasis Control
Use this feature to congure the De-emphasis control on DMI. The options are -6 dB
and -3.5 dB.