Supermicro X11SCW-F - Page 86

Super X11SCW-F User's Manual
86
Native ASPM
Select Enabled for the operating system to control the Active State Power Management
(ASPM). Select Disabled for the BIOS to control the ASPM. The options are Auto, Enabled,
and Disabled.
USBConguration
The following USB items will be displayed:
• USB Module Version
• USB Controllers
• USB Devices
Legacy USB Support (Available when USB Functions are not Disabled)
Select Enabled to support legacy USB devices. Select Auto to disable legacy support if
USB devices are not present. Select Disabled to have USB devices available for Extensive
Firmware Interface (EFI) applications only. The settings are Enabled, Disabled, and Auto.
XHCI Hand-off
This feature is for operating systems that do not support eXtensible Host Controller Interface
(XHCI) hand-off. When this feature is enabled, XHCI ownership change will be claimed by
the XHCI driver. The settings are Enabled and Disabled.
USB Mass Storage Driver Support
Select Enabled for USB mass storage device support. The options are Disabled and Enabled.
Port 60/64 Emulation
Select Enabled for I/O port 60h/64h emulation support which will provide complete USB
keyboard legacy support for the operating system that does not support Legacy USB devices.
The options are Disabled and Enabled.
PCIe/PCI/PnPConguration
Option ROM Execution
Onboard Video Option ROM
Use this feature to select the onboard video rmware type to be loaded. The options are
Legacy and EFI.
PCI PERR/SERR Support
Select Enabled to allow a PCI device to generate a PERR/SERR number for a PCI Bus Signal
Error Event. The options are Disabled and Enabled.