Supermicro X11SPH-NCTPF - Page 44

44
Super X11SPH-NCTPF/-NCTF User's Manual
NIC1/NIC2 (LAN1/LAN2 or LAN3/LAN4)
The Network Interface Controller (NIC) LED connection for LAN port 1 or port 3 is located on
pins 11 and 12 of JF1, while LAN port 2 or port 4 is on pins 9 and 10. Attach the NIC LED
cables here to display network activity. Refer to the table below for pin denitions.
LAN1/LAN2 or
LAN3/LAN4 LED
Pin Denitions (JF1)
Pin# Denition
9/11 Vcc
10/12 NIC2 Active LED/
NIC1 Active LED
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable to pin 14 to
show hard drive activity status. Refer to the table below for pin denitions.
HDD LED
Pin Denitions (JF1)
Pins Denition
13 3.3V Stdby
14 HDD Active
Power Button
UID LED
NIC1 Active LED
Reset Button
HDD LED
PWR LED
Reset
PWR
3.3V Stby
3.3V Stby
19
X
Ground
X
3.3V Stby
20
12
Ground
NIC2 Active LED
NMI
3.3V
3.3V
Power Fail LED
OH/Fan Fail LED
Ground
1. HDD LED
2. NIC1 LED
3. NIC2 LED
1
2
3