Supermicro X11SPH-NCTPF - Page 45

45
Chapter 2: Installation
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table below
for pin denitions.
Power LED
Pin Denitions (JF1)
Pins Denition
15 3.3V
16 PWR LED
NMI Button
The non-maskable interrupt (NMI) button header is located on pins 19 and 20 of JF1. Refer
to the table below for pin denitions.
NMI Button
Pin Denitions (JF1)
Pins Denition
19 Control
20 Ground
Power Button
UID LED
NIC1 Active LED
Reset Button
HDD LED
PWR LED
Reset
PWR
3.3V Stby
3.3V Stby
19
X
Ground
X
3.3V Stby
20
12
Ground
NIC2 Active LED
NMI
3.3V
3.3V
Power Fail LED
OH/Fan Fail LED
Ground
1. NMI
2. PWR LED
1
2