Chapter 4: BIOS
75
4.2 Main Setup
When you rst enter the AMI BIOS setup utility, you will enter the Main setup screen. You can
always return to the Main setup screen by selecting the Main tab on the top of the screen.
The Main BIOS setup screen is shown below. The following Main menu items will display:
How To Change the Conguration Data
The conguration data that determines the system parameters may be changed by entering
the AMI BIOS setup utility. This setup utility can be accessed by pressing <Delete> at the
appropriate time during system boot.
Note: For AMI UEFI BIOS Recovery, please refer to the UEFI BIOS Recovery User
Guide posted @ http://www.supermicro.com/support/manuals/.
To Next Page
Loading...
Need help?
General
