X11SSH-F/-LN4F User Manual
92
Logical Device Settings
This item displays the current status of a serial part specied by the user.
Serial Port 2 Change Settings
This feature species the base I/O port address and the Interrupt Request address of a
serial port specied by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address.
The options for Serial Port 2 are Use Automatic Settings, (IO=2F8h; IRQ=3; DMA), (IO=3F8h;
IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA), (IO=2F8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA), (IO=3E8h;
IRQ=3, 4, 5,7, 9, 10, 11, 12; DMA), and (IO=2E8h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA).
Serial Port 2 Attribute
Select SOL to use COM Port 2 as a Serial_Over_LAN (SOL) port for console redirection.
The options are COM and SOL.
The options for Serial Port 4 are Use Automatic Settings, (IO=248h; IRQ=7; DMA), (IO=240h;
IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA), (IO=248h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA), (IO=250h;
IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA), and (IO=258h; IRQ=3, 4, 5, 7, 9, 10, 11, 12; DMA).
Intel Server Platform Services
Intel Server Platform Services Conguration
The following items will display as detected by the BIOS:
• ME BIOS Interface Version
• SPS Version
• ME FW (Firmware) Status Value
• ME FW (Firmware) State
• ME FW (Firmware) Operation State
• ME FW (Firmware) Error Code
• ME NM FW (Firmware) Status Value
• BIOS Booting Mode
• Cores Disabled
• ME FW (Firmware) SKU Information
• End-of POST Status
To Next Page
Loading...
Need help?
General
