X11SSH-F/-LN4F User Manual
90
PCH SLOT4 PCI-E 3.0 X4 (IN X8) OPROM
Use this feature to select which rmware type to be loaded for the add-on card in this slot
for system boot. The options are Disabled, Legacy, and EFI.
PCH SLOT5 PCI-E 3.0 X8 OPROM
Use this feature to select which rmware type to be loaded for the add-on card in this slot
for system boot. The options are Disabled, Legacy, and EFI.
PCH SLOT6 PCI-E 3.0 X8 (IN X16) OPROM
Use this feature to select which rmware type to be loaded for the add-on card in this slot
for system boot. The options are Disabled, Legacy, and EFI.
Onboard LAN Option ROM Type
Select Enabled to enable Option ROM support to boot the computer using a network device
specied by the user. The options are Legacy and EFI.
Onboard LAN1 Option ROM
Use this option to select the type of device installed in LAN Port1 used for system boot. The
default setting for LAN1 Option ROM is PXE.
Onboard LAN2 Option ROM/Onboard LAN3 Option ROM/Onboard LAN4 Option ROM
(LAN3 Option ROM/Onboard LAN4 Option ROM: Available on the X11SSH-LN4F only)
Use this option to select the type of device installed in a LAN port specied by user for system
boot. The default setting for this item is Disabled.
Onboard Video Option ROM
Use this item to select the Onboard Video Option ROM type. The options are Disabled,
Legacy, and EFI.
VGA Priority
Use this item to select the graphics device to be used as the primary video display for system
boot. The options are Onboard and Offboard.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unied Extensible
Firmware Interface) for network stack support. The options are Enabled and Disabled.
IPv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Enabled and Disabled.
IPv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are Enabled and Disabled.
To Next Page
Loading...
Need help?
General
