12
X11SSV-Q User's Manual
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPAC1 Audio Enable Pins 1-2 (Enabled)
JI
2
C1/JI
2
C2 SMB to PCI-E Slots Enable/Disable Pins 2-3(Disabled)
JPME2 Manufacturing Mode Pins 1-2 (Normal)
JPUSB1 USB Wake-Up Enable/Disable Pins 2-3 (Disabled)
JWD1 Watch Dog Pins 1-2 (Reset)
LED Description Status
LED1 Power LED Solid Green: Power On, Blink: S3
Connector Description
BT1 Onboard Battery
COM1/COM2 COM Ports
FAN1 ~ FAN4 System/CPU Fan Headers (FAN1: CPU Fan)
HD Audio Mic In and Line Out Ports
HDMI/DP High Defnintion Multimdedia Interface/DisplayPort
DVI-I Digital Video Interface (Analog and Digital)
I-SATA0 ~ I-SATA4 IntelĀ® PCH SATA 3.0 Ports (I-SATA0 mux with SATA device installed on m-PCIE)
I-SGPIO1 Serial Link General Purpose I/O Header
J3 Audio Front Panel Header
JD1 External Speaker Header (Pins 1-4: Speaker)
JF1 Front Panel Control Connector
JGPIO1 General Purpose I/O Header
JL1 Chassis Intrusion Header
JP1 4-pin Power Connector for HDD (to provide power from the motherboard to onboard devices)
JPW1 24-pin ATX Power Connector
JPW2
8-pin 12V DC Power Connector for CPU (Required) (or alternative single power for special
enclosure when the 24-pin ATX power is not in use)
JSD1/JSD2 SATA DOM Power Connectors
JSMB1 System Management Bus Header
JTPM1 Trusted Platform Module/Port 80 Connector
LAN1/LAN2 Gigabit Lan (RJ45) Ports
M.2 M.2 Slot (2280/2242) M Key
m-PCIE (F/H) Mini PCI-E Full/Half Slot
SLOT1 CPU PCI-E 3.0 X16 Slot
USB1/2, USB3/4 Back panel Universal Serial Bus (USB) 3.0 Port
USB5/6 USB 3.0 Header
USB7/8, USB11/12 USB 2.0 Headers
USB9 USB Type A Header
To Next Page
Loading...
