Supermicro X11SSV-Q - Page 36

36
X11SSV-Q User's Manual
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table below
for pin denitions.
Power LED
Pin Denitions (JF1)
Pin# Denition
15 +3.3V Stby
16 PWR LED
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach a cable here to indicate
the status of HDD-related activities, including IDE, SATA activities. Refer to the table below
for pin denitions.
HDD LED
Pin Denitions (JF1)
Pin# Denition
13 +3.3V Stby
14 HD LED
NIC1/NIC2 (LAN1/LAN2)
The NIC (Network Interface Controller) LED connection for LAN port 1 is located on pins
11 and 12 of JF1, and the LED connection for LAN Port 2 is on Pins 9 and 10. Attach NIC
LED cables to NIC1 and NIC2 LED indicators to display network activities. Refer to the table
below for pin denitions.
LAN1/LAN2 LED
Pin Denitions (JF1)
Pin# Denition
9/11 +3.3V Stby
10/12 NIC Activity LED
Power Butt
on
OH/Fan Fail LED
1
NIC1 Activity LED
Reset Button
2
HDD LED
Power LED
Reset
PWR
3.3V Stby
3.3V
3.3V Stby
3.3V
Ground
Ground
X
X
NIC2 Activity
LED
3.3V Stby
1516
1
4
3
2
1. PWR LED
2. HDD LED
3. NIC1 Activity LED
4. NIC2 Activity LED