Supermicro X12SCA-F - Page 101

Chapter 4: UEFI BIOS
101
Intel(R) Ethernet Connection (11) I219-LM - XX:XX:XX:XX:XX:XX
PORT CONFIGURATION MENU
Note: The feature is supported by X12SCA-F.
NIC Conguration
Link Speed
This feature controls the port speed used for the selected boot protocol. The options
are Auto Negotiated, 10 Mbps Half, 10 Mbps Full, 100 Mbps Half, and 100 Mbps Full.
Wake On LAN
This feature enables the system to be powered on using an in-band packet. The options
are Disabled and Enabled.
Blink LEDs
Use this feature to identify a physical network port. Enter a number to force the associated
network port LED to blink.
PORT CONFIGURATION INFORMATION
Information for the LAN port conguration is displayed. Note that the items listed below
may vary depending on the motherboard.
• UEFI Driver
• Adapter PBA
• Chip Type
• PCI Device ID
• PCI Adress
• Link Status
• MAC Address
Driver Health
This submenu displays the health of the LAN and its related controller.