25
Chapter 2: Installation
2.2 Processor and Heatsink Installation
• Use ESD protection.
• Unplug the AC power cord from all power supplies after shutting down the system.
• Check that the plastic protective cover is on the CPU socket and none of the socket pins
are bent. If they are, contact your retailer.
• When handling the processor, avoid touching or placing direct pressure on the LGA lands
(gold contacts). Improper installation or socket misalignment can cause serious damage
to the processor or CPU socket, which may require manufacturer repairs.
• Thermal grease is pre-applied on a new heatsink. No additional thermal grease is needed.
• Refer to the Supermicro website for updates on processor support.
• All graphics in this manual are for illustrations only. Your components may look dierent.
Installing the LGA1200 Processor
1. Press the load lever to release the load plate, which covers the CPU socket, from its
locking position.
Load Lever
Load Plate
Plastic Cap
To Next Page
Loading...
