15
Chapter 1: Introduction
Quick Reference Table
Jumper Description Default Setting
JBT1 Clear CMOS (onboard) Short Pads to Clear CMOS
JPAC1 Audio Enable Pins 1-2 (Enabled)
JPG1 VGA Enable (for X12SCA-F only) Pins 1-2 (Enabled)
JPL1/2 LAN1/LAN2 Enable/Disable Pins 1-2 (Enabled)
JPME2 Intel Manufacturing Mode Pins 1-2 (Normal)
JWD1 Watch Dog Function Enable Pins 1-2 (RST)
LED Description Color/State
BMC_HB_LED
X12SCA-F: BMC Heartbeat LED
X12SAE: Standby Power LED
X12SCA-F: Green Blinking (Normal)
X12SAE: Solid Green (Standby Power On)
CATERR_LED Catastrophic Error LED Solid Orange: System CATERR
LED4 UID LED (for X12SCA-F, IPMI only) Blue on: Unit Identied
PWR_LED Onboard Power LED Green on: Power on
Note: The table above is continued on the next page.
To Next Page
Loading...
