Supermicro X12SCA-F - Page 16

16
Super X12SAE/X12SCA-F User's Manual
Connector Description
12V_PUMP_PWR1 12V 4-pin Power Connector for CPU Liquid Cooling Pump
AUDIO FP Front Panel Audio Header
B1 Onboard Battery
COM1 COM1 Header
CPU_FAN1 ~ CPU_FAN2 CPU Fan Headers
DP Back Panel DisplayPort
HD AUDIO High Denition Audio Ports
HDMI Back Panel High Denition Multimedia Interface
I-SATA0~3 Intel Serial ATA (SATA 3.0) Ports 0~3 (6Gb/sec)
IPMI_LAN Dedicated IPMI LAN Port (for X12SCA-F only)
JD1 Speaker/Buzzer (Pins 1~4: External Speaker, Pins 3~4: Buzzer)
JF1 Front Control Panel Header
JL1 Chassis Intrusion Header
JLED1 3-pin Power LED Header
JPI2C1 Power Supply SMBus I2C Header
JPW1 24-pin ATX Main Power Connector (Required)
JPW2 +12V 8-pin CPU Power Connector (Required)
JSD1 SATA DOM (Disk-On-Module) Power Connector
JSTBY1 Standby Power Header
JTPM1 Trusted Platform Module (TPM)/Port 80 Header
LAN1/LAN2 RJ45 1GbE/2.5GbE
PCIE M.2-M1/M.2-M2
PCI-E M.2 Connectors 1 and 2 (PCI-E 3.0 x4 link), Small Form Factor Devices and Other Portable
Devices for High Speed NVMe SSDs
SLOT1 PCI Slot, 32 Bit/33MHz with 5V Single Voltage
SLOT2 PCI-E 3.0 x4 Slot
SLOT3 PCI-E 3.0 x1 Slot (for X12SAE only)
SLOT4 PCI-E 3.0 x16 Slot (PCI-E 3.0 x8 link)
SLOT6 PCI-E 3.0 x16 Slot (PCI-E 3.0 x16 link) or PCI-E 3.0 x8 (when CPU Slot4 is populated)
SP1 Internal Speaker/Buzzer
SYS_FAN1 ~ SYS_FAN3 System Fan Headers
USB 0/1 Front Access USB 2.0 Header
USB 2/3 Back Panel USB 3.2 Gen 1 Ports (Type A)
USB 4/5 Front Access USB 3.2 Gen 1 Header
USB 6/7 Back Panel USB 3.2 Gen 2 Ports (USB6: Type C, USB7: Type A)
USB 8/9 Back Panel USB 3.2 Gen 2 Ports (Type A)
USB 10 Front Panel Accessible USB 3.2 Gen 2 20-pin Connector
VGA VGA Port (for X12SCA-F, IPMI only)