Appendix B: Software
125
B.2 Driver Installation
The Supermicro website that contains drivers and utilities for your system is at https://www.
supermicro.com/wftp/driver. Some of these must be installed, such as the chipset driver.
After accessing the website, go into the CDR_Images (in the parent directory of the above
link) and locate the ISO le for your motherboard. Download this le to a USB ash drive or
a DVD. (You may also use a utility to extract the ISO le if preferred.)
Another option is to go to the Supermicro website at http://www.supermicro.com/products/.
Find the product page for your motherboard, and "Download the Latest Drivers and Utilities".
Insert the ash drive or disk and the screenshot shown below should appear.
Figure B-3. Driver & Tool Installation Screen
Note: Click the icons showing a hand writing on paper to view the readme les for each
item. Click the computer icons to the right of these items to install each item (from top
to bottom) one at a time. After installing each item, you must reboot the system
before moving on to the next item on the list. The bottom icon with a CD on it allows
you to view the entire contents.
To Next Page
Loading...
