Supermicro X12SCA-F - Page 112

Super X12SAE/X12SCA-F User's Manual
112
Exit Deployed Mode
Press <Enter> button to switch between Deployment and User Mode.
Key Management
Restore Factory Keys
This feature resets the content of all UEFI Secure Boot key databases to factory defaults.
Reset to Setup Mode
This feature deletes the contents of all UEFI Secure Boot key databases. This will result
in entering Setup Mode.
Export Secure Boot variables
This feature allows the user to copy NVRAM content of Secure boot variables to les in a
root folder on a le system device.
Enroll EFI Image
This feature allows the image to run in Secure Boot Mode. Enroll SHA256 Hash Certicate
of the image into the Authorized Signature Database.
Device Guard Ready
Remove 'UEFI CA' from DB
Use this feature to remove the Microsoft UEFI CA certicate from the database.
Restore DB Defaults
Select Yes to restore the DB defaults or select No to cancel.
Secure Boot Variable / Size / Keys / Key Source
Platform Key (PK)
This feature allows the user to congure the settings of the platform keys.
Details
Review details on current settings of the platform keys.
Export
This feature allows the user to export Platform Keys to an available le system.
Update
Select Yes to load the new Platform Keys (PK) from the manufacturer's defaults. Select
No to load the Platform Keys from a le.