18
Super X12SAE/X12SCA-F User's Manual
Motherboard Features
BIOS
• 256Mb AMI BIOS
®
SPI Flash BIOS
• ACPI 6.0, Plug and Play (PnP), BIOS rescue hot-key, riser card auto detection support, and SMBIOS 3.0 or later
Power Management
• ACPI power management
• Power button override mechanism
• Power-on mode for AC power recovery
• Wake-on-LAN
• Power supply monitoring
System Health Monitoring
• Onboard voltage monitoring for +12V, +5V, +3.3V, CPU, Memory, VBAT, +5V stdby, +3.3V stdby, +1.8V PCH, +1.05V
PCH, +1.0V PCH, CPU temperature, VRM temperature, LAN temperature, PCH temperature, system temperature, and
memory temperature
• 5 CPU switch phase voltage regulator
• CPU thermal trip support
• Platform Environment Control Interface (PECI)/TSI
Fan Control
• Single cooling zone
• Multi-speed fan control via onboard Super I/O
• Five (5) 4-pin fan headers
System Management
• Trusted Platform Module (TPM) support
• SuperDoctor® 5
• Chassis intrusion header and detection (Note: Please connect a cable from the Chassis Intrusion header at JL1 to the
chassis to receive an alert)
LED Indicators
• BMC_HB_LED
• CATERR_LED
• Power LED
• UID LED (for X12SCA-F, IPMI only)
Dimensions
• 12" (W) x 9.6" (L) ATX (304.8mm x 243.84mm)
Note:
The CPU maximum thermal design power (TDP) is subject to chassis and heatsink
cooling restrictions. For proper thermal management, please check the chassis and heatsink
specications for proper CPU TDP sizing.
To Next Page
Loading...
