Supermicro X12SCA-F - Page 58

58
Super X12SAE/X12SCA-F User's Manual
1. PWR_LED
2. BMC_HB_LED
Power LED (PWR_LED)
An Onboard Power LED is located at PWR_LED on the motherboard. When the PWR_LED
is on, the AC power cable is connected. Make sure to disconnect the power cable before
removing or installing any component. Refer to the table below for more information.
Power LED (PWR_LED)
LED Status
Status Denition
O󰀨 System O󰀨
On System on
BMC Heartbeat LED
BMC Heartbeat LED is located next to the PCI-E Slot 4 faced to the I/O back panel and
marked by BMC_HB_LED. The BMC is functioning normally when the BMC_HB_LED is
blinking in X12SCA-F. The standby power is on when the BMC_HB_LED is on in X12SAE.
Refer to the table below for more information.
BMC Heartbeat LED (BMC_HB_LED)
LED Status
Motherboard Color Status
X12SCA-F Green Blinking IPMI is ready for use
X12SAE Solid Green Standby power on
IPMI CODE
X12SCA-F
REV:1.01
MAC CODE
MAC CODE
BAR CODE
DESIGNED IN USA
BIOS LICENSE
B3
JD1
JPW2
JBT1
CPU_FAN2
CPU_FAN1
SYS_FAN1
SYS_FAN2
BMC_HB_LED
JSD1
JF1
JTPM1
JPW1
SP1
JPI2C1
JL1
COM1
LED4
CATERR_LED
PWR_LED
JPL1
JPAC1
JPG1
JPL2
JWD1
JPME2
SYS_FAN3
PCH
BMC
USB3.2Gen2
USB10
USB3.2 Gen2
12V_PUMP_PWR1
HDMI
DP
DIMMA1
DIMMA2
DIMMB1
DIMMB2
VGA
DVI
USB3.2Gen2 USB3.2Gen1
LAN1
USB6/7
LAN2
USB2/3
IPMI_LAN
USB8/9
AUDIO
USB3.2 Gen1
UID
USB4/5
CPU SLOT6 PCI-E 3.0 X16 CPU SLOT4 PCI-E 3.0 X8 (IN X16)
I-SATA0
I-SATA1
I-SATA2
I-SATA3
PCH SLOT2 PCI-E 3.0 X4
JSTBY1
SLOT1 PCI 33MHZ
JLED1
AUDIO FP
USB0/1
PCI-E_M.2-M1
PCI-E_M.2-M2
1
2