Supermicro X12SCA-F - Page 80

Super X12SAE/X12SCA-F User's Manual
80
PEG Port Conguration
PEG Port Conguration
CPU SLOT6 PCI-E 3.0 X16
Enable Root Port
Select Enable to activate the Root Port. The options are Disabled, Enabled, and
Auto.
Max Link Speed
Select Auto, Gen1, Gen2, or Gen3 to set the PEG Max Link Speed.
CPU SLOT4 PCI-E 3.0 X8 (IN x 16)
Enable Root Port
Select Enable to activate the Root Port. The options are Disabled, Enabled, and
Auto.
Max Link Speed
Select Auto, Gen1, Gen2, or Gen3 to set the PEG Max Link Speed.
GT - Power Management Control
GT - Power Management Control
RC6 (Render Standby)
Use this feature to enable Render Standby support. The options are Disabled and
Enabled.
Maximum GT Frequency
This feature denes the Maximum GT Frequency. Choose between 100MHz (RPN)
and 1200MHz (RP0). Any value beyond this range will be clipped to its min/max sup-
ported by the CPU. The options are Default Max Frequency and 100MHz~1200MHz
(in increments of 50MHz).
Disable Turbo GT frequency
This feature disables Turbo GT frequency. If set to Enabled, Turbo GT frequency be-
comes disabled. If set to Disabled, GT frequency limiters will be removed. The options
are Disabled and Enabled.