Supermicro X12SCA-F - Page 86

Super X12SAE/X12SCA-F User's Manual
86
Discard Changes and Exit
Select this feature to discard all the changes and return to the upper conguration
page.
Save Changes and Exit
Select this feature to save the changes you've made and return to the upper congu-
ration page.
PCH-FW Conguration
The following PCH-IO information is displayed:
• ME Firmware Version
• ME Firmware Mode
• ME Firmware SKU
ME FW Image Re-Flash
Use this feature to enable or disable the ME Firmware image re-ash capability. The options
are Disabled and Enabled.
AMT Conguration
USB Provisioning of AMT
Use this feature to enable or disable USB provisioning. The options are Disabled and
Enabled.
CIRA Conguration
Activate Remote Assistance Process
Use this feature to activate Remote Assistance. Enabling this feature will also trigger
the CIRCA boot. The options are Unchecked and Checked.
*If this feature is set to Checked, the feature below will be available for congu-
ration:
CIRA Timeout
Use this feature to set the timeout value for MPS connection. Use 0 for the default
timeout value of 60 seconds.