Supermicro X12SPA-TF - Jumpers and Connectors

Package contents
• One Supermicro Motherboard
• Six SATA Cables
• One I/O Shield
• One Quick Reference Guide
• One GPU to CPU Power Cable
• One CPU Carrier
Connector Description
12V_PUMP_PWR1 12V 4-pin Power Connector for CPU Liquid Cooling Pump
AUDIO FP Front Panel Audio Header
BATTERY Onboard Battery
COM1, COM2 COM1: COM Port (Back Panel). COM2: COM Header
CPU SLOT1/3/5/7
PCIe 4.0 x16 Slots
* CPU SLOT1 will change to PCIe x8 link when either M.2-C03 or M.2-C04 is populated with an SSD. Also, CPU SLOT1
will be completely disabled when either M.2-C01 or M.2-C02 is populated with an SSD.
CPU SLOT2/4/6 PCIe 4.0 x8 Slots (IN x16)
FAN1 ~ FAN6 CPU Fan Headers
FAN A ~ FAN D System Fan Headers
HD AUDIO Back Panel High Denition Audio Ports
I-SATA0~7 Intel Serial ATA (SATA 3.0) Ports 0~7 (6Gb/second)
I-SGPIO1, I-SGPIO2 Serial General Purpose I/O Headers
IPMI_LAN Dedicated IPMI LAN Port
JD1 Power LED / Speaker Header (Pins 1-3: Power LED, Pins 4-7: Speaker)
JF1 Front Control Panel Header
JIPMB1 4-pin External I
2
C Header (for an IPMI card)
JL1 Chassis Intrusion Header
JOH1-OH Overheat LED Header
JPI2C1 Power Supply SMBus I
2
C Header
JPRG1 CPLD FW Update (Debug Mode)
JPWR1/3/4 +12V 8-pin CPU Power Connectors (Required)
JPWR2 24-pin ATX Main Power Connector (Required)
JRK1 Intel VROC RAID Key Header (Note: A VROC hardware key is required to enable an M.2 RAID card.)
JSD1, JSD2 SATA DOM (Disk-On-Module) Power Connectors
JSPDIF_OUT Sony/Philips Digital Interface (S/PDIF) Out Header
JSTBY1 Standby Power Header (5V)
JTPM1 Trusted Platform Module (TPM)/Port 80 Header
LAN1, LAN2 LAN1: RJ45 1GbE LAN Port. LAN2: RJ45 10GbE LAN Port
M.2-C01 ~ M.2-C04
PCIe 4.0 x4 M.2 M-key Sockets
(Small form factor devices and other portable devices for high speed NVMe SSDs)
MH14_SRW4 ~ MH14_SRW7 M.2 Mounting Holes
SP1 Internal Speaker/Buzzer
UID-SW Unit Identier (UID) Switch
USB0/1 Front Access USB 2.0 Header
USB2/3 Front Access USB 3.2 Gen. 1 Header
USB4 Back Panel USB 3.2 Gen. 2x2 Port
USB5, USB6, USB7, USB8 Back Panel USB 3.2 Gen. 1 Ports
USB9, USB10 Back Panel USB 2.0 Ports
USB11 Front Access USB 3.2 Gen. 2 Port
USB12 Front Access USB 3.2 Gen. 2 Header
VGA VGA Port
Jumpers and Connectors
Jumpers
Jumper Description Default
J9701, J9702 Debug Mode Pins 1-2 (Normal)
JBT1 Clear CMOS (Onboard) Short Pads to Clear CMOS
JP4 USB11/12 Disable Pins 1-2 (Normal)
JP5 USB4 Disable Pins 1-2 (Normal)
JPAC1 HD Audio Enable/Disable Pins 1-2 (Enabled)
JPFR1 PFR Debug (Pins 1-2: PFR CPLD EN_JTAG) None (Normal)
JPFR2 PFR Operation (Close: force power on without CPU installed) Open (Normal PFR Operation)
JPFR3 PFR Force Recovery (Pins 1-2: force PFR recovery) None (Normal)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL1, JPL2 LAN1/LAN2 Enable/Disable Pins 1-2 (Enabled)
JPME2 Intel Manufacturing Mode Pins 1-2 (Normal)
JPUSB1 USB7/8 Wake Up Pins 1-2 (Enabled)
JVRM1 Debug Mode None (Normal)
JWD1 Watch Dog Function Enable Pins 1-2 (Reset)
Connectors