Supermicro X12SPW-TF - Quick Reference Table

13
Chapter 1: Introduction
Note: Table is continued on the next page.
Quick Reference Table
Jumper Description Default Setting
JBT1 CMOS Clear Open (Normal)
JPL1 LAN1 Enable/Disable (I210, -F only) Pins 1-2 (Enabled)
JPL2 LAN2 Enable/Disable (I210, -F only) Pins 1-2 (Enabled)
JPL3 LAN1/2 Enable/Disable (X550, -TF only) Pins 1-2 (Enabled)
JPME1 ME Manufacturing Mode Pins 1-2 (Normal)
LED Description Status
LE3 Power LED Solid Green: Power On
LE4 M.2 HDD LED Blinking Green: Device Working
LEDBMC BMC Heartbeat LED Blinking Green: BMC Normal
UID-LED Unit Identier (UID) LED Solid Blue: Unit Identied
Connector Description
BT1 Onboard CMOS Battery
COM1, COM2 COM Port, COM Header
FAN1 ~ FAN7 CPU/System Fan Headers
I-SATA0 ~ I-SATA7 Intel® PCH SATA 3.0 Ports (with RAID 0, 1, 5, 10)
IPMI_LAN Dedicated IPMI LAN Port
JF1 Front Control Panel Header
JI2C_EXP1 4-pin BMC External I
2
C Header (for internal testing only)
JIPMB1 4-pin BMC External I
2
C Header
JL1 Chassis Intrusion Header
JNCSI1 NC-SI Header for IPMI Support
JNVI
2
C NVMe I
2
C Header
JPI
2
C1 Power System Management Bus (SMB) I
2
C Header
JPWR1 8-pin Power Connector
JPWR2 4-pin Power Connector
JPWR3 24-pin ATX Power Connector
JRK1 Intel RAID Key Header
JSD1, JSD2 SATA DOM Power Connectors
JSTBY1 Standby Power Header
JVRM1, JVRM2 SMBus Clock/DATA header connected to CPU/Mem VRMs
LAN1, LAN2 LAN (RJ45) Ports
M.2-H M.2 PCIe 3.0 x4/SATA3 Slot (supports M-Key 2280 and 22110)
NVME0/1, NVME2/3 PCIe 4.0 x8 Slimline SAS Connector
SXB1A, SXB1B, SXB1C Supermicro Proprietary WIO Left Add-on Card Slots