16
Super X12SPW-TF/F User's Manual
Note: The table above is continued on the next page.
Motherboard Features
Peripheral Devices
• Two USB 2.0 ports on the rear I/O panel (USB0/1)
• Two USB 3.2 Gen 1 ports on the rear I/O panel (USB4/5)
• One front accessible USB 2.0 headers with two USB connections (USB2/3)
• One front accessible USB 3.2 Gen 1 header with two USB connections (USB6/7)
• One USB 3.2 Gen 1 Type-A header (USB8)
BIOS
• 256Mb AMI BIOS
®
SPI Flash BIOS
• ACPI 6.0, Plug and Play (PnP), BIOS rescue hot-key, riser card auto detection support, and SMBIOS 3.0 or later
Power Management
• ACPI power management
• Power button override mechanism
• Power-on mode for AC power recovery
• Wake-on-LAN
• Power supply monitoring
System Health Monitoring
• Onboard voltage monitoring for +12V, +5V, +3.3V, CPU, Memory, VBAT, +5V stdby, +3.3V stdby, +1.8V PCH, +1.05V
PCH, +1.0V PCH, Vcore, Vmem, CPU temperature, VRM temperature, LAN temperature, PCH temperature, system
temperature, and memory temperature
• 7 CPU switch phase voltage regulator
• CPU thermal trip support
• Platform Environment Control Interface (PECI)/TSI
Fan Control
• Fan status monitoring via IPMI connections
• Single cooling zone
• Low-noise fan speed control
• Seven 4-pin fan headers
System Management
• Trusted Platform Module (TPM) support
• SuperDoctor® 5
• Chassis intrusion header and detection
• Server Platform Service
LED Indicators
• CPU/system overheat LED
• Power/suspend-state indicator LED
• Fan failed LED
• UID/remote UID
• HDD activity LED
• LAN activity LED
To Next Page
Loading...
