Supermicro X12SPW-TF - Page 40

40
Super X12SPW-TF/F User's Manual
BIOS
LICENSE
1
BAR CODE
IPMI CODE
MAC CODE
SAN MAC
DESIGNED IN USA
X12SPW-TF/F
REV: 2.00
JNCSI1
S-SGPIO1
JBT1
JPWR2
JSD2
JSD1
S-SATA1
S-SATA0
JSTBY1
JRK1
JPWR3
JPWR1
JF1
JVRM2
JVRM1
JPFR3
JPFR2
JPFR1
JL1
JD1
JPRG1
JWD1
JP4
FAN6
FAN7
FAN4
FAN3
FAN5
FAN1
BT1
NVME0/1
NVME2/3
MH16
MH15
JPI2C1
JIPMB1
JNVI2C
JI2C_EXP1
MH4
MH6
MH1
MH9
MH5
MH3
MH2
JPME1
JPL2
JMP2
JMP1
JPL1
JPL3
SXB2: PCIe 4.0 X16
SXB1A
SXB1B: PCIe 4.0 X16 + X16
SXB1C
COM2
I-SATA4~7
M.2-H
COM1
DIMMG1 DIMMH1 DIMME1 DIMMF1
DIMMA1 DIMMB1 DIMMD1 DIMMC1
CPU
USB6/7(3.0)
USB4/5 (3.0)
USB2/3
LAN2
LAN1
CMOS CLEAR
I-SATA0~3
TPM/PORT80
UID-SW
UID-LED
VGA
USB0/1
IPMI_LAN
USB8(3.0)
LE3
LEDBMC
LE4
FAN2
BMC
AST2600
PCH
621A
1. UID Switch
2. UID LED
1
2
Unit Identier Switch (UID-SW): One button with two functions
A Unit Identier (UID) switch and two LED Indicators are located on the motherboard. The
UID switch, UID-SW, is located next to the VGA port on the back panel.
UID Switch
Pin Denitions
Pin# Denition
1 Button In
2 Ground
G1 Ground
G2 Ground
UID LED
Pin Denitions
Color Status
Blue: On Unit Identied
Note: After pushing and holding the UID-SW for 12 seconds, all IPMI settings includ-
ing username and password will revert back to the factory default. Only the network
settings and FRU are retained.
Function User Input Behavior LED Activity
UID LED Indicator
Push Once Turns on the UID LED UID LED turns solid blue
Push Again Turns o󰀨 the UID LED UID LED turns o󰀨
BMC Reset
Push and hold for 6 seconds BMC will do a cold boot BMC Hearbeat LED turns solid green
Push and hold for 12 seconds BMC will reset to factory default BMC Hearbeat LED turns solid green