Supermicro X12SPW-TF - Page 81

Chapter 4: BIOS
81
CPU T State Control
Software Controlled T-States
Use this feature to enable Software Controlled T-States. The options are Disable and
Enable.
If the feature above is set to Enable, the next feature is available for conguration:
T-State Throttle Level
Use this feature to enable or disable CPU throttling, which reduces power consumption.
The options are Disable, 6.25%, 12.5%, 18.75%, 25.0%, 31.25%, 37.5%, 43.75%, 50.0%,
56.25%, 62.5%, 68.75%, 75.0%, 81.25%, 87.5%, 93.75%.
Chipset Conguration
Warning: Setting the wrong values in the following features may cause the system to malfunc-
tion.
North Bridge
Uncore Conguration
Uncore Conguration
• Number of CPU
• Number of IIO
• Current UPI Link Speed
• Current UPI Link Frequency
• Global MMIO Low Base / Limit
• Global MMIO High Base / Limit
• PCIe Conguration Base / Size
Degrade Precedence
Use this feature to set degrade precedence when system settings are in conict. Select
Topology Precedence to degrade Features. Select Feature Precedence to degrade Topol-
ogy. The options are Topology Precedence and Feature Precedence.