Supermicro X12SPW-TF - Page 94

Super X12SPW-TF/F User's Manual
94
MAC:xxxxxxxxxxxx-IPv4 Network Conguration
MAC:xxxxxxxxxxxx-IPv4 Network Conguration
Congured
Use this feature to indicate whether the network address is congured successfully or not.
The options or Disabled and Enabled.
Save Changes and Exit
Select this feature to save the changes for the features above and exit.
KMIP Server Conguration
KMIP Server IP address
Enter the IP4 address in dotted-decimal notation (e.g., 255.255.255.255).
KMIP TCP Port number
Enter the KMIP TCP port number (from 100 to 9999) The default is 5696.
TimeZone
Use this feature to select the current time zone.
TCG Nvme KMS Policy
Use this feature to select the Trusted Computing Group (TCG) NVMe KMS policy. The options
are Normal Unlock, Do Nothing, Reset All Devices Deleted Key Id List.
TCG Nvme KMS Status Retry Time
Use this feature to select the number of attempts of test connections to the Key Management
Server. The options are 0 - 300 seconds and the default is 60.
Client UserName
Press Enter to create a client username.
Client Password
Press Enter to create a client username password.
KMS TLS Certicate
CA Certicate
Use this feature to enroll factory defaults or load the CA certicates from a le. The options
are Update, Delete, and Export.