Supermicro X13SRA-TF - Led Indicators; Memory Population Guidelines

ContaCt InformatIon
• www.supermicro.com (Email: support@supermicro.com)
• Manuals: https://www.supermicro.com/support/manuals
• Drivers & Utilities: https://www.supermicro.com/wdl/driver/
• Safety: https://www.supermicro.com/about/policies/safety_information.cfm
LED Indicators
LED Description Color/State
BMC LED BMC Heartbeat LED Blinking Green: BMC Normal
LED8 Status Code LED Digital Readout
M.2-C01/M.2-C02 LED M.2 LEDs for M.2-C01/M.2-C02 Blinking Green: Device Working
Power LED Onboard Power LED Solid Green: Power On
UID-LED Unit Identier (UID) LED Blue On: Unit Identied
CPU and Memory Support
LED Indicators
The X13SRA-TF motherboard supports a single Intel Xeon W-2400 (64L)/ W-3400 (112L) series processor in Socket E1 LGA4677. The
memory support is up to 512GB of ECC RDIMM or 2TB of 3DS RDIMM with speeds of up to 4800 MT/s (1DPC) or 4400 MT/s (2DPC) in
eight ECC DDR5 (288-pin) SMD DIMM slots.
Populating these DIMM slots with a pair of memory modules of the same type and size will result in interleaved memory, which will
improve memory performance.
Notes: 1) For memory optimization, use only DIMM modules that have been validated by Supermicro. For the latest memory updates,
please refer to our website at https://www.supermicro.com/products/motherboard.
2) Always connect the power cord last, and always remove it before adding, removing, or changing any hardware components.
Memory Population Guidelines
• It is recommended to use DDR5 DIMM models of the same size, type, and speed.
• Mixed DIMM speeds can be installed. However, all DIMMs will run at the speed of the slowest DIMM.
• In a given channel, the black slot can be enabled only when the gray slot is populated rst.
DIMM Memory Installation
DIMMA2 (Black Slot)
DIMMA1 (Gray Slot) DIMMB2 (Black Slot) DIMMB1 (Gray Slot) DIMMF1 (Gray Slot)
DIMMF2 (Black Slot) DIMME1 (Gray Slot) DIMME2 (Black Slot)
Towards the CPU
Towards the CPU