Need help?Do you have a question about the Supermicro SuperWorkstation 7049GP-TRT and is the answer not in the manual?
General| Processor Support | Intel Xeon Scalable Processors |
|---|---|
| CPU Socket | LGA 3647 |
| Chipset | Intel C621 |
| Memory Capacity | Up to 1.5TB |
| Memory Slots | 12 DIMM slots |
| CPU Series | Intel Xeon |
| Memory Type | DDR4 |
| Expansion Slots | 7 x PCI-E 3.0 slots |
| Network Interface | Dual 10G Ethernet |
| Operating System Support | Windows, Linux |
| Form Factor | Tower/4U |
| M.2 | 2x M.2 slots, M-Key, 2280/22110, SATA3/PCI-E 3.0 x4 |
| Networking | 10GBASE-T |
Overview of the manual's purpose and target audience.
Important information and links for system setup and support.
Explains safety symbols used in the manual.
Brief outline of system functions and features.
Instructions for inspecting and preparing the system.
Overview of main system specifications and capabilities.
Details about the physical chassis and its features.
Description of switches and LEDs on the front control panel.
Features located on the front of the chassis.
Features located on the rear of the chassis.
Diagram and explanation of motherboard components and connectors.
Table of jumpers and connectors with default settings.
Advice on setting up the system.
Guidance on choosing a location and general precautions.
Procedure to safely remove power from the system.
Steps to open the chassis for component access.
Details on motherboard components and their installation.
Instructions for installing CPU and heatsink.
Procedure to remove and replace system fans.
Step-by-step guide for installing RAM modules.
Information on replacing the onboard CMOS battery.
Instructions for installing the air shroud for cooling.
Explanation of system cooling features and fan types.
Details on connecting the 24-pin ATX and 8-pin CPU power.
Explains various motherboard headers and connectors.
Configuration options using jumpers on the motherboard.
Explanation of various system LEDs and their status.
Steps for installing Windows OS and drivers.
Guide to downloading and installing system drivers.
Overview of the system monitoring software.
Information on Intelligent Platform Management Interface.
Overview of the AMIBIOS Setup utility.
Configuration of system date, time, and BIOS version.
Detailed BIOS settings for system performance and features.
Configuration of SMBIOS event logging.
Configuration of Intelligent Platform Management Interface settings.
Settings for system security, passwords, and secure boot.
Configuration of system boot order and options.
Options for saving or discarding BIOS changes and exiting.
List of beep codes and their error messages.
Information on AMI BIOS checkpoint codes.
Explanation of safety warning symbols and statements.
General installation warnings and precautions.
Warning regarding circuit breaker ratings.
Safety warning about disconnecting power before servicing.
Warning about qualified personnel for installation.
Warning about installation in restricted access areas.
Warning about battery replacement and disposal.
Warning about multiple power supply connections.
Warning about hazardous voltage on the backplane.
Requirement to follow electrical codes.
Warning about proper product disposal according to regulations.
Warning about moving fan parts during hot-swap.
Warning about using correct power cables and adapters.
Introduction to UEFI BIOS and its recovery features.
Process for recovering the BIOS image.
Steps to recover BIOS using a USB device.
Safety warnings specific to Traditional Chinese version.
Statement on restricted substances compliance.
To Next Page