Chapter 6: UEFI BIOS
87
6.4 Event Logs
Change SMBIOS Event Log Settings
Enabling/Disabling Options
SMBIOS Event Log
Change this item to enable or disable all features of the SMBIOS (System Management BIOS)
Event Logging during system boot. The options are Disabled and Enabled.
Erasing Settings
Erase Event Log
If No is selected, data stored in the event log will not be erased. Select Yes, Next Reset,
data in the event log will be erased upon next system reboot. Select Yes, Every Reset, data
in the event log will be erased upon every system reboot. The options are No, (Yes, Next
reset), and (Yes, Every reset).
When Log is Full
Select Erase Immediately for all messages to be automatically erased from the event log
when the event log memory is full. The options are Do Nothing and Erase Immediately.
To Next Page
Loading...
Need help?
General
