Need help?Do you have a question about the Supermicro SuperServer SYS-221H-TNR and is the answer not in the manual?
General| Form Factor | 2U |
|---|---|
| Memory Slots | 16 |
| CPU Series | Intel Xeon Scalable |
| Memory Type | DDR4 |
| Network Interface | Dual 10GBase-T |
| IPMI | Yes, IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Explains the manual's purpose, target audience, and scope.
Provides links for drivers, utilities, safety info, and support contacts.
Information on how to securely erase data from storage devices.
Explains symbols and warnings used in the manual.
Provides a brief outline of the SuperServer SYS-221H-T Series functions and features.
Displays the main features of the SYS-221H-TN24R and SYS-221H-TNR.
Covers main component locations, block diagrams, and motherboard layout.
Details the X13DEM motherboard layout with jumper, connector, and LED locations.
Provides advice and instructions for mounting the system in a server rack.
Instructions for inspecting the system box for damage upon arrival.
Covers choosing a setup location, rack, and server precautions for installation.
Information on installing the chassis into a rack unit using the provided rails.
Procedure to safely remove power from the system before maintenance.
Instructions on how to open the chassis and access internal components.
Precautions for handling ESD-sensitive components to prevent damage.
Detailed steps for installing CPUs and heatsinks, including ESD precautions.
Information on supported DDR5 memory types, speeds, and installation procedures.
Guidance on battery removal, proper disposal, and installation.
Procedures for handling hot-swap drive carriers and removing/installing drives.
Information on system fans and air shrouds for optimal cooling performance.
Details on expansion card slot configurations and installation procedures.
Information on installing AIOM cards for network connectivity.
Diagrams showing cable routing for storage, PCIe, IO, and power.
Procedures for replacing hot-plug power supply modules.
Describes power supply connectors and their pin definitions for system power.
Details various motherboard headers and connectors like TPM, Fan, and VROC.
Describes I/O ports like BMC LAN, AIOM, and VGA connections.
Explains the status and meaning of various LEDs on the motherboard.
Steps for installing Windows OS, including driver loading and boot device selection.
Instructions for downloading and installing system drivers and utilities from Supermicro's website.
Overview of Baseboard Management Controller (BMC) functionality and support.
Guidance on initial login procedures and password management for the BMC.
Describes support for SATA, SAS, and NVMe storage protocols based on configuration.
Details drive bay configurations and required part numbers for system options.
Lists available power supply modules with wattage and 80Plus level.
Instructions for installing and removing the cable management arm for cable organization.
Information on the Trusted Platform Module (TPM) and its security functions.
Overview of Intel VROC for NVMe RAID, including requirements and restrictions.
Steps to enable Intel VMD in BIOS for NVMe RAID configurations.
Detailed guide on creating NVMe RAID volumes using VROC in BIOS.
Procedures for hot-plugging and hot-unplugging NVMe SSDs with Intel VMD.
Provides links to Supermicro's website for specifications, manuals, FAQs, and support.
Explains the role of BMC for remote access, monitoring, and management.
Step-by-step guides for diagnosing and resolving common system issues like no power or boot failure.
Instructions on how to clear the CMOS settings to resolve configuration issues.
Guidance on purchasing replacement parts from authorized Supermicro distributors.
Steps to follow before contacting technical support, including information gathering.
Contact information for Supermicro headquarters, Europe, and Asia-Pacific offices.
Introduces industry standard warnings for potential bodily injury.
Explains the meaning of the general danger warning symbol and its associated hazards.
Warning regarding building's short-circuit protection rating.
Critical warning to disconnect all power sources before accessing chassis interior.
Warning that only trained/qualified personnel should install, replace, or service equipment.
Warning that the unit is for installation in restricted access areas only.
Warning about explosion risk from incorrect battery replacement and proper disposal.
Warning about multiple power supply connections and need to remove all for de-energizing.
Warning about hazardous voltage/energy on backplane during operation and caution during servicing.
Instruction to comply with local and national electrical codes during installation.
Warning regarding ultimate disposal according to national laws and regulations.
Warning about hazardous moving fan parts and keeping clear of fan blades/openings.
Warning to use only provided/designated cables/adapters to prevent malfunction or fire.
Details about supported Intel Xeon Scalable processors, socket, and TDP.
Identifies the Intel C741 PCH chipset used in the system.
Lists BIOS features including SPI BIOS, EFI GUI, and various management tools.
Specifies memory support up to 8TB DDR5 ECC with speeds up to 4800MT/s.
Details storage drive bay configurations for TNR and TN24R models.
Information on the eight PCIe 4.0 x16 FH slots.
Describes AIOM slots, BMC LAN, USB, and VGA ports.
Specifies the X13DEM motherboard model and dimensions.
Details the CSE-HS219 chassis model and its 2U rackmount dimensions.
Describes the cooling system comprising four 8-cm fans and two air shrouds.
Lists power supply models, wattage, 80Plus level, and input/output specifications.
Specifies operating and non-operating temperature and humidity ranges.
Lists various regulatory compliance standards the product adheres to.
Lists applicable directives and standards for EMC, safety, and environment.
Warning regarding lead exposure and potential health effects as per California law.
Warning specific to products containing lithium coin cells and special handling.
To Next Page