Supermicro SuperServer SYS-221H-TNR - Creating the Processor Carrier Assembly

41
Chapter 3: Maintenance and Component Installation
Creating the Processor Carrier Assembly
The processor carrier assembly contains a 4th Gen Intel Xeon Scalable processor and a
processor carrier.To create the processor carrier assembly, please follow the steps below:
1. Hold the processor with the component side (including the gold contacts) facing down.
Locate the small, gold triangle at the corner of the processor and the corresponding
hollowed triangle on the processor carrier as shown in the graphics below. Please note
that the triangle indicates the pin 1 location.
2. Turn over the processor carrier and locate pin 1 on the CPU and pin 1 on the carrier.
Then, turn the processor over with component side (including the gold contacts) facing
up and locate CPU keys on the processor. Finally, locate the CPU keys and four latches
on the carrier as shown below.
CPU Key
CPU Key
Latch
Latch
Latch
Latch
Latch
Latch
Latch
Latch
CPU Key
CPU Key
CPU Key
CPU Key
Latch
Latch
Latch
Latch
SP XCC Series
Max Series (HBM)
SP MCC Series
Pin 1
SP XCC Series
Carrier E1A
SP MCC Series
Carrier E1B
Pin 1
Pin 1
Pin 1
Max Series (HBM)
Carrier E1C
Pin 1
Pin 1